Quadrant shower enclosure sealing process steps

When sealing a quadrant shower enclosure, it is crucial to choose the right sealing material. Commonly used sealing materials include high-performance silicone, shadowless glue, etc. These materials should have good waterproofness, weather resistance and adhesion to ensure a stable sealing effect during long-term use.
Sealing process steps
Cleaning the surface: Before sealing, the contact surface between the shower room frame and the glass plate needs to be thoroughly cleaned. Use detergents or solvents such as alcohol to remove dust, oil and other impurities on the surface to ensure that the contact surface is dry and free of stains.
Applying sealing materials: After selecting the appropriate sealing material, apply it according to the requirements of the product manual. Generally speaking, the sealing material needs to be evenly applied to the contact surface between the shower room frame and the glass plate to ensure that the application thickness is consistent and there is no omission. During the application process, special scrapers or finger cots and other tools can be used to assist in order to improve the uniformity and efficiency of the application.
Compacting and curing: After applying the sealing material, it is necessary to use appropriate pressure to fit the glass plate tightly to the shower room frame to ensure that the sealing material fully fills the gap and removes bubbles. Then wait for it to fully cure according to the curing requirements of the sealing material. During the curing process, avoid any movement or impact on the shower room to avoid affecting the sealing effect.
Inspection and repair: After the sealing material is cured, the seal needs to be carefully inspected. The inspection content includes whether the seal is tight, whether there is any leakage or glue breakage, etc. If any problems are found, they should be repaired in time to ensure that the sealing performance of the shower room meets the requirements.